Product Description

Switch wireless controller NFC Bluetooth connection with screen capture vibration six-axis with gyroscope accelerator support PC
 

feature of product: 
 1) Compatible with all key and motor functions of the original Switch of the Switch (Sensor function is available);

 2) Provide 4 red LED indication functions;
 3) Provide 16 button function input keys to support TURBO function;
 4) Built-in dual motor, 256-level precision 3D joystick;
 5) The button responds sensitively and the control is handy;

6) Compatible with PC host (supports X_input and D_input modes).

 

 

product description:

1, function description

     Through the Bluetooth, the handle is connected to the switch host;

     Connect to the host PC via the USB cable in the off state to implement X_input and D_input mode functions.

2, handle operation

     For the first time, press and hold the HOME button for 3 seconds to boot into the pairing. LED1-4 flashes quickly, the pairing is successful, and the corresponding channel light assigned by the Switch host is on.

     Connect again and press the HOME button to boot back into the connection. LED1-4 flashes slowly, the pairing is successful, and the corresponding channel light assigned by the Switch host is on.

3, the button composition

     As shown below.

4, motor function

    Handle with dual motor function

5, charging

    When the handle is turned off, when the handle is inserted into the adapter, LED1-4 blinks, and when it is full, LED1-4 goes out.

    When the handle is connected to the USB, when the handle is inserted into the USB, the corresponding channel light flashes slowly, and the light is long after being fully charged.

6, low power alarm

     When the handle battery voltage is lower than 3.6V (according to the battery characteristic principle), the corresponding channel light flashes slowly, indicating that the handle is low and needs to be charged.

7, shut down

     When the handle is turned on, press and hold the HOME button for 5 seconds to enter the shutdown;

     When the handle is online, it will automatically shut down without any button operation within 10 minutes.

8, on the upgrade

     The handle can be driven directly from the USB driver.

9, reset function

     When the handle is abnormal, it can be reset by pressing the reset button on the back of the handle.

10, accept the distance

      The handle can be received at a distance of 8-10M, depending on the environment.

11, about PC wired mode

       Press and hold the "+" button and connect to the PC with the USB cable. The LED1 and LED3 flash and stop at the second light, indicating that the Dinput mode has been entered. Press and hold the HOME button for 3 seconds to switch to The Xinput mode changes to the third light.

12, the basic parameters of the handle:

battery

Built-in polymer lithium battery

battery capacity

500mAh

Battery life

15-20 hours (the game is different)

Charging time

2.5 hours

Charging voltage

USB DC5V

recharging current

<350mA

Charging interface

TYPE-C

Product Image